Clause 3 – How to understand the definition of “stationary appliance”

stationary appliance: fixed appliance or an appliance which is not a portable appliance.

Stationary appliance includes fixed appliance and not a portable appliance. The characteristic of a stationary appliance is that once it is put into use, it will be placed in a fixed position. At the same time, the position of the appliances will generally not be changed during normal use.
Typical examples are wall-mounted room air conditioners and refrigerators weighing more than 18 kg.

Similar Posts

  • Clause 3 – How to understand the definition of “portable appliance”

    portable appliance: appliance that is intended to be moved while in operation or an appliance, other than a fixed appliance, having a mass less than 18 kg. This item is relatively easy to understand. Products that are less than 18kg are relatively light, so they are easy to move during operation, including humidifiers, fans, air…

  • ข้อ 3 – วิธีทำความเข้าใจคำจำกัดความของ “ความถี่ที่กำหนด”

    โดยทั่วไป ความถี่ที่กำหนดคือความถี่สาธารณูปโภคมาตรฐานของประเทศตลาดเป้าหมาย ณ เวลาที่ออกแบบผลิตภัณฑ์ เนื่องจากทั่วโลก มีเพียงสองความถี่ยูทิลิตี้คือ 50Hz และ 60Hz ค่าสามารถเป็นได้เพียง 50Hz หรือ 60Hz หรือทั้ง 50 และ 60Hz ความถี่ที่กำหนด กำลังไฟฟ้าเข้าที่กำหนดหรือกำลังไฟฟ้าที่กำหนด แรงดันไฟฟ้าที่กำหนด ฯลฯ เป็นพารามิเตอร์พื้นฐานที่กำหนดลักษณะของอุปกรณ์ ซึ่งได้มาจากความต้องการของตลาดเป้าหมายตลอดจนเงื่อนไขด้านสาธารณูปโภค เมื่อเราทดสอบตามมาตรฐาน เราจะกำหนดเงื่อนไขการทดสอบตามพารามิเตอร์เหล่านี้ ดังนั้นต้องยืนยันพารามิเตอร์เหล่านี้ก่อนการทดสอบ ไม่เช่นนั้นจะทำให้เกิดการทำงานซ้ำซ้อน และสร้างผลการทดสอบที่ไม่ถูกต้องWhen we test according to the standard, we set our test conditions according to these parameters. Therefore, these parameters must be confirmed before the test, otherwise it will…

  • Clause 3 – How to understand the definition of “accessible part”

    accessible part: part or surface that can be touched by means of test probe B of IEC 61032, and if the part or surface is metal, any conductive part connected to it.NOTE Accessible non-metallic parts with conductive coatings are considered to be accessible metal parts. There are some parts or surfaces in the appliance that…

  • ข้อ 3 – วิธีทำความเข้าใจคำจำกัดความของ “ไฟล์แนบประเภท Z”

    สายไฟของผลิตภัณฑ์บางชนิดถูกหล่อขึ้นรูปพร้อมกับผลิตภัณฑ์ และไม่สามารถถอดออกได้ด้วยเครื่องมือทั่วไป หรือสายไฟของอุปกรณ์บางชนิดถูกโยนลงบนตัวเครื่องด้วยวัสดุเทอร์โมเซตติงบางชนิดหลังจากเชื่อมต่อแล้ว โครงสร้างที่คล้ายกันเหล่านี้จำเป็นต้องทำลายวัสดุที่เชื่อมต่อกับสายไฟเพื่อให้การดำเนินการเปลี่ยนสายไฟเสร็จสมบูรณ์ ตัวอย่าง: ดังแสดงในรูป สายไฟถูกหล่อเข้ากับเปลือกของปั๊มจุ่มด้วยอีพอกซีเรซิน หากต้องเปลี่ยนสายไฟ จะต้องทำลายอีพอกซีเรซินที่หล่อภาพภายในปั้มน้ำ internal view for water pump

  • Clause 3 – How to understand the definition of “electronic component”

    electronic circuit: circuit incorporating at least one electronic component. The standard references electronic circuits in clause 19.11, clause 19.11.1, and clause 22.5. These requirements are additional to those for electronic circuits. The standard recognizes that electronic circuits alone cannot provide adequate protection. Electronic circuits may be susceptible to interference and malfunction, or they may be…

  • ข้อ 3 – วิธีทำความเข้าใจคำจำกัดความของ “ไฟล์แนบประเภท X, ประเภท Y, ประเภท Z”

    สิ่งที่แนบประเภท X: การเชื่อมต่อสายไฟเสร็จสมบูรณ์ในพื้นที่ที่เตรียมไว้เป็นพิเศษในเครื่องใช้ไฟฟ้า ดังนั้นเมื่อเปลี่ยนสายไฟจะไม่สัมผัสส่วนอื่นใดนอกจากแผงขั้วต่อและสายภายใน สกรูที่ยึดสายไฟเป็นสกรูหัวแฉกหรือหัวแบนธรรมดา การเปลี่ยนสายไฟให้ดำเนินการภายในช่วงที่ควบคุมได้ สายไฟที่ผู้ใช้ทั่วไปแทนที่นั้นค่อนข้างเรียบง่ายและใช้งานได้ การแนบประเภท Y: เมื่อเปลี่ยนสายไฟ โดยทั่วไปจำเป็นต้องเปิดโครงโครงสร้างของเครื่องใช้ไฟฟ้า และยึดตัวเรือนเหล่านี้ด้วยสกรูพิเศษ เช่น สกรูหกเหลี่ยม หลังจากเปิดโครงโครงสร้างของเครื่องแล้ว ชิ้นส่วนทดแทนอาจสัมผัสชิ้นส่วนที่เคลื่อนไหวที่เป็นอันตรายหรือชิ้นส่วนอื่นๆ ที่มีไฟฟ้าภายในเครื่องได้ ในกรณีนี้ จะปลอดภัยกว่าหากกำหนดการเชื่อมต่อเป็นเอกสารแนบประเภท Y และกำหนดให้ผู้เชี่ยวชาญเปลี่ยนสายไฟ โดยปกติแล้ว สกรูยึดจะเป็นสกรูธรรมดาที่ผู้ใช้ทั่วไปสามารถใช้งานได้ แต่หากสัมผัสชิ้นส่วนที่เป็นอันตรายได้ในระหว่างการเปลี่ยนสายไฟ โดยทั่วไปจะกำหนดให้เป็นสิ่งที่แนบมาประเภท Y ไฟล์แนบประเภท Z ดูคำอธิบายและตัวอย่างใน 3.2.6. type Z attachment, see the explanation and examples in 3.2.6.