Clause 3 – How to understand the definition of “battery-operated appliance”

(IEC 60335-1 Ed. 5.1) battery-operated appliance: appliance deriving its energy from batteries enabling the appliance to perform its intended function without a mains connection.
(IEC 60335-1 Ed. 6)battery-operated appliance: appliance deriving its energy from batteries enabling the appliance to perform its intended function without a supply connection
Note 1 to entry: A battery-operated appliance can have a supply connection.
Standards prior to version 5.1 did not have definitions for battery-operated appliance.

There is no mention of battery-operated appliances in the first clause-scope) of the standard prior to version 5.0.
More and more products will be powered by batteries. This is especially true for personal care products, including razors, hair stylers, etc. Battery operated appliances are mainly appliances that can only derive energy from a battery. The battery can be a rechargeable battery, a dry cell battery, and the battery can be installed in the contents of the appliance or placed in a battery box. It should be emphasized that the appliance is not capable of obtaining electrical energy through a supply connection. A supply connection includes a connection to supply mains or a connection to a solar panel. Batteries can be supplied via a connection to supply mains or a connection to a solar panel.
In version 5.1, the term “mains connection” is used to refer to municipal power supply. In version 6.0, the term used was changed to “supply connection”, and there is a comment in the redline version of the standard that explains that “supply connection” includes a connection to supply mains or a connection to a solar panel.

Similar Posts

  • Clause 3 – How to understand the definition of “self-resetting thermal cut-out”

    self-resetting thermal cut-out: thermal cut-out that automatically restores the current after the relevant part of the appliance has cooled down sufficiently In the definition there is a clear mention, when the temperature is cooled to a certain degree, in fact, its intention is to control the temperature is not too high, when the temperature is…

  • ข้อ 3 – จะเข้าใจคำจำกัดความของ “ระยะห่างที่คืบคลาน” ได้อย่างไร

    คำจำกัดความของระยะห่างตามผิวฉนวนมาจากมาตรฐาน IEC 60664-1:2020 เนื่องจากเราต้องอธิบายระยะตามผิวฉนวน เราจึงต้องแสดงรูปภาพรูปที่ 4 ถึงรูปที่ 14 ในมาตรฐาน IEC 60664-1:2020 ในที่นี้ ผู้อ่านจะต้องพิจารณาอย่างรอบคอบถึงวิธีการกำหนด “X mm” หากมีร่องบนเส้นทางที่ทำให้เกิดระยะตามผิวฉนวน ก็จะมีสถานการณ์ร่องสะพาน โดยส่วนตัวผมคิดว่าสาเหตุหลักในการเชื่อมโยงคือการสะสมของสารมลพิษในร่อง มลพิษเหล่านี้ส่วนใหญ่เป็นฝุ่น และฝุ่นชื้นจะนำไฟฟ้าได้มากกว่า ดังนั้นการคัดลอกข้อความต้นฉบับของมาตรฐานจึงมีสมมติฐาน 3 ข้อดังต่อไปนี้: – ในกรณีที่ระยะห่างข้ามร่องน้อยกว่าความกว้าง X ที่ระบุ (ดูตารางที่ 1) ระยะห่างตามผิวฉนวนจะถูกวัดโดยตรงผ่านร่องและไม่คำนึงถึงรูปร่างของร่อง (ดูรูปที่ 4) – โดยที่ระยะห่างข้ามร่องเท่ากับหรือมากกว่าความกว้าง X ที่ระบุ (ดูตารางที่ 1) ระยะตามผิวฉนวนจะถูกวัดตามแนวโครงร่างของร่อง (ดูรูปที่ 5)– ช่องใดๆ ให้ถือว่าต่อเชื่อมด้วยตัวต่อฉนวนที่มีความยาวเท่ากับความกว้าง X ที่ระบุ และวางไว้ในตำแหน่งที่ให้ผลเสียมากที่สุด (ดูรูปที่ 6)– ระยะห่างจากอากาศและระยะห่างตามผิวฉนวนที่วัดระหว่างชิ้นส่วนซึ่งสามารถรับตำแหน่งที่แตกต่างกันโดยสัมพันธ์กัน ให้วัดเมื่อชิ้นส่วนเหล่านี้อยู่ในตำแหน่งที่ไม่เอื้ออำนวยที่สุดรูปที่ 4 – ข้ามร่องเงื่อนไข: เส้นทางที่พิจารณาประกอบด้วยร่องด้านขนานหรือบรรจบกันทุกความลึกที่มีความกว้างน้อยกว่า X…

  • Clause 3 – How to understand the definition of “thermostat”

    thermostat: temperature-sensing device, the operating temperature of which may be either fixed or adjustable and which during normal operation keeps the temperature of the controlled part between certain limits by automatically opening and closing a circuit. The thermostat itself does not control the temperature, the thermostat senses the temperature and controls the temperature by switching…

  • Clause 3 – How to understand the definition of “protective extra-low voltage circuit”

    protective extra-low voltage circuit: earthed circuit operating at safety extra-low voltage which is separated from other circuits by basic insulation and protective screening, double insulation or reinforced insulationNOTE 1 Protective screening is the separation of circuits from live parts by means of an earthed screen.NOTE 2 A protective extra-low voltage circuit is also known as…

  • ข้อ 3 – จะเข้าใจคำจำกัดความของ “ฉนวนสองชั้น” ได้อย่างไร

    คำจำกัดความมีไว้เพื่อให้คำอธิบายฉนวนพื้นฐานและฉนวนเสริมในมาตรฐานง่ายขึ้นเท่านั้น โดยใช้ชื่อเดียวเพื่ออธิบายสองชื่อ ดังแสดงในรูปด้านล่าง สายไฟมีฉนวนสองชั้น ปลอกลวดด้านในและปลอกลวดสีดำด้านนอก ซึ่งหมายถึงฉนวนสองชั้น ตามที่แสดงในภาพสองภาพต่อไปนี้ (พัดลม) ปลอกสายไฟภายในในภาพด้านซ้ายเป็นฉนวนพื้นฐาน และแผ่นด้านล่างของปลอกด้านนอกเป็นฉนวนเพิ่มเติม รูปภาพแผงวงจรต่อไปนี้มีเอฟเฟกต์ภาพเคลื่อนไหว ด้านขวาของเส้นประเป็นส่วนที่เข้าถึงไม่ได้โดยมีแรงดันไฟฟ้าใช้งาน 220-240V และด้านซ้ายของเส้นประเป็นส่วนที่เข้าถึงได้โดยมีแรงดันไฟฟ้าใช้งานสูงสุด 24V (สมมติว่าโครงสร้างอยู่ที่ตำแหน่งของเส้นประ มีคุณสมบัติตรงตามข้อกำหนดของฉนวนสองชั้นหรือฉนวนเสริม) เพื่อให้มั่นใจถึงการแยกที่มีประสิทธิภาพ โดยทั่วไปแล้ว สายไฟทางด้านขวาของเส้นประ (สายภายในสีแดงและสีน้ำเงิน) ไม่สามารถสัมผัสสายไฟภายในที่ค่อนข้างบางทางด้านซ้ายได้ ปลอกสายไฟของสายไฟด้านขวาเป็นฉนวนพื้นฐาน เนื่องจากปลอกสายไฟสัมผัสโดยตรงกับชิ้นส่วนที่มีไฟฟ้า และเป็นชั้นแรกของการป้องกันสำหรับชิ้นส่วนที่มีไฟฟ้า เปลือกลวดของลวดด้านซ้ายสามารถกำหนดได้ว่าเป็นฉนวนเสริมเท่านั้น แต่จะเป็นไปตามข้อกำหนดสำหรับฉนวนเสริมในข้อ 29.3 หรือไม่ จะต้องวิเคราะห์เมื่อแนะนำข้อ 29.3 ควรสังเกตไว้ที่นี่ว่าเปลือกลวดของเส้นลวดด้านซ้ายไม่สามารถกำหนดเป็นฉนวนพื้นฐานได้ และเปลือกลวดของเส้นลวดด้านขวาไม่สามารถเป็นฉนวนเสริมได้It should be noted here that the wire sheath of the left wire cannot be defined as basic insulation, and the wire sheath…

  • |

    If the PCB is sealed with solid sealant, how to determine the creepage distance and clearance?

    functional insulation as well as other insulation exists on circuit boards. Typically, the surface environment of a circuit board is determined to be either Pollution degree 3 or pollution degree 2.If the circuit board is mounted in an electrical box and sealed with a solid sealant, the sealing will look as follows: What should be…