Clause 3 – How to understand the definition of “electronic component”

electronic component: part in which conduction is achieved principally by electrons moving through a vacuum, gas or semiconductor.
NOTE Neon indicators are not considered to be electronic components.

Early vacuum tubes were components that allowed electrons to conduct in a vacuum and were the core components of old radios and televisions.
Electrons move through specific gases, colliding with gas molecules and causing them to emit light or conduct electricity. Examples include plasma display screens.
Electrons move through semiconductor materials such as silicon and germanium, and their conductivity can be precisely controlled through doping, electric fields, and other methods. Examples include transistors, integrated circuits (chips), diodes, triodes, MOSFETs (metal oxide semiconductor field effect transistors), and thermistors.
Note: “Neon indicator lights are not considered electronic components” is a very important qualification. Although neon lamps meet the definition of “electrons moving in a gas,” they are generally considered simple electric light sources.

The term “electronic component” generally refers to components (such as transistors and integrated circuits) that perform signal processing, control, and amplification functions in complex electronic circuits. Neon lamps are excluded because of their single function (indicating on/off) and simple structure.
Resistors, capacitors, and inductors are often referred to as passive components to distinguish them from active components (such as transistors and integrated circuits), which are not electronic components. Mechanical switches, thermostats, thermal cut-outs, pressure switches, motors, heating elements, batteries, and transformers are not electronic components.

This illustrates the subtle difference between theoretical and practical classifications.

Names and pictures of various common electronic components
type of diode
different packages of transistors

The main purpose of the definition of an electronic component is to show that electronic components are not completely reliable when they fulfil a protective function, but of course this unreliability is relative to non-electronic components.

Similar Posts

  • Clause 3 – How to understand the definition of “thermostat”

    thermostat: temperature-sensing device, the operating temperature of which may be either fixed or adjustable and which during normal operation keeps the temperature of the controlled part between certain limits by automatically opening and closing a circuit. The thermostat itself does not control the temperature, the thermostat senses the temperature and controls the temperature by switching…

  • ข้อ 3 – จะเข้าใจคำจำกัดความของ “การทำงานปกติ” ได้อย่างไร

    การทำงานปกติ คือ สภาวะการทำงานตามวิธีที่ระบุไว้ในคู่มือการใช้งานตามปกติ บางครั้งก็เป็นสถานะของการทำงานในลักษณะที่ระบุไว้ในมาตรฐาน แม้ว่าโหมดการทำงานนี้จะไม่ได้อยู่ในคู่มือการใช้งานและโดยปกติผู้ใช้จะไม่ทำงานในลักษณะนี้ ในที่นี้ การดำเนินการตามปกติอาจมีการกำหนดใหม่ตามมาตรฐาน Part II ที่แตกต่างกัน มาตรฐานส่วนที่ 2 สำหรับตู้เย็น ตามมาตรฐาน โดยมีเงื่อนไขว่าสภาวะการทำงานปกติต้องล้างช่องเก็บของตู้เย็น ปิดลิ้นชักและประตูตู้เย็น ตลอดจนตั้งค่าการควบคุมอุณหภูมิที่ผู้ใช้ปรับเองให้ลัดวงจรหรือใช้งานไม่ได้ การทำงานปกติเป็นเพียงสภาวะการทำงานเดียวเท่านั้น และบางครั้งคำจำกัดความมาตรฐานของการทำงานปกติอาจมีจุดประสงค์เพื่อกำหนดสภาวะการทำงานที่รุนแรงที่สุดnormal operation is only one operating condition, and sometimes the standard definition of normal operation may be intended to set the harshest operating conditions.

  • ข้อ 3 – วิธีทำความเข้าใจคำจำกัดความของ “อุปกรณ์คลาส 0I”

    เครื่องใช้ไฟฟ้ามีขั้วต่อสำหรับเชื่อมต่อตัวนำป้องกันภายนอก (ตัวนำสายดินป้องกัน) แต่ไม่มีสายไฟสำหรับเชื่อมต่อเครื่องใช้ไฟฟ้ากับตัวนำป้องกันในการเดินสายไฟแบบตายตัว เครื่องใช้ไฟฟ้าอาจมีสายไฟหรือโครงสร้างด้านในเพื่อส่งสัญญาณความต่อเนื่องของดิน ในญี่ปุ่น มีปลั๊กสำหรับอุปกรณ์คลาส 0I โดยเฉพาะ ดังที่แสดงด้านล่าง จากสิ่งที่ฉันเข้าใจ ปัจจุบัน มีเพียงญี่ปุ่นเท่านั้นที่ใช้อุปกรณ์คลาส 0I โดยปกติแล้วสายไฟจะมีสายดิน แต่การต่อลงดินไม่ได้กระทำโดยหมุดสายดินในปลั๊ก แต่จะใช้เครื่องมือในการเชื่อมต่อขั้วต่อหรือวงแหวนสายดินที่แยกจากกันเพื่อให้การต่อสายดินมีประสิทธิภาพ นอกจากนี้ ยังมีขั้วต่อสายดินบนอุปกรณ์ด้วย ก่อนการติดตั้ง ขั้วต่อนี้ไม่ได้เชื่อมต่อกับสายไฟภายนอกใดๆ และโดยปกติจะเชื่อมต่อระหว่างการใช้งานและการติดตั้ง From what I understand, at present, only Japan uses class 0I appliances. Usually, the supply cord have an earthing wire, but the earthing is not done by the earthing pin in the plug. Instead,…

  • Clause 3 – How to Understand the Definition of “all-pole disconnection”

    all-pole disconnection: disconnection of both supply conductors by a single initiating action or, for multi-phase appliances, disconnection of all supply conductors by a single initiating actionNOTE For multi-phase appliances, the neutral conductor is not considered to be a supply conductor. Single-phase power: An AC power system composed of one live wire and one neutral wire.​Three-phase…

  • ข้อ 3 – วิธีทำความเข้าใจคำจำกัดความของ “ความถี่ที่กำหนด”

    โดยทั่วไป ความถี่ที่กำหนดคือความถี่สาธารณูปโภคมาตรฐานของประเทศตลาดเป้าหมาย ณ เวลาที่ออกแบบผลิตภัณฑ์ เนื่องจากทั่วโลก มีเพียงสองความถี่ยูทิลิตี้คือ 50Hz และ 60Hz ค่าสามารถเป็นได้เพียง 50Hz หรือ 60Hz หรือทั้ง 50 และ 60Hz ความถี่ที่กำหนด กำลังไฟฟ้าเข้าที่กำหนดหรือกำลังไฟฟ้าที่กำหนด แรงดันไฟฟ้าที่กำหนด ฯลฯ เป็นพารามิเตอร์พื้นฐานที่กำหนดลักษณะของอุปกรณ์ ซึ่งได้มาจากความต้องการของตลาดเป้าหมายตลอดจนเงื่อนไขด้านสาธารณูปโภค เมื่อเราทดสอบตามมาตรฐาน เราจะกำหนดเงื่อนไขการทดสอบตามพารามิเตอร์เหล่านี้ ดังนั้นต้องยืนยันพารามิเตอร์เหล่านี้ก่อนการทดสอบ ไม่เช่นนั้นจะทำให้เกิดการทำงานซ้ำซ้อน และสร้างผลการทดสอบที่ไม่ถูกต้องWhen we test according to the standard, we set our test conditions according to these parameters. Therefore, these parameters must be confirmed before the test, otherwise it will…

  • ข้อ 3 – วิธีทำความเข้าใจคำจำกัดความของ “กำลังไฟฟ้าเข้าพิกัด”

    กำลังไฟฟ้าเข้าที่ผู้ผลิตกำหนดให้กับเครื่องหมายเหตุ 1: ถ้าไม่ได้กำหนดกำลังไฟฟ้าเข้าให้กับเครื่องใช้ไฟฟ้า กำลังไฟฟ้าเข้าที่กำหนดสำหรับเครื่องทำความร้อนและเครื่องใช้ไฟฟ้าแบบรวมจะเป็นกำลังไฟฟ้าเข้าที่วัดเมื่อจ่ายเครื่องใช้ไฟฟ้าที่แรงดันไฟฟ้าที่กำหนดและทำงานภายใต้การทำงานปกติในกรณีส่วนใหญ่ อุปกรณ์จะได้รับกำลังไฟฟ้าเข้าที่กำหนด บางครั้ง ผลิตภัณฑ์จะได้รับเฉพาะกระแสไฟเข้าที่กำหนดเท่านั้น แต่ในระหว่างการทดสอบจริง มาตรฐานกำหนดให้ต้องพิจารณาสภาพการทำงานของผลิตภัณฑ์ตามกำลังไฟฟ้าเข้าที่กำหนด จากนั้นจึงจะสามารถกำหนดข้อมูลกำลังไฟฟ้าเข้าตามข้อมูลในหมายเหตุนี้ได้ นี่เป็นสถานการณ์ที่หายาก หากเงื่อนไขการทดสอบของผลิตภัณฑ์เป็นไปตามกำลังไฟฟ้าเข้าที่กำหนด โดยปกติแล้วผลิตภัณฑ์จะมีป้ายกำกับว่ากำลังไฟฟ้าเข้าที่กำหนด แม้ว่าผู้ผลิตผลิตภัณฑ์จะไม่ระบุพิกัดกำลังไฟฟ้าเข้า แต่ห้องปฏิบัติการทดสอบของบุคคลที่สามมักจะขอข้อมูลพิกัดกำลังไฟฟ้าเข้าเมื่อทำการทดสอบผลิตภัณฑ์ ต่อไปนี้คือตัวอย่างสมมุติของเครื่องทำความร้อนในห้องที่ใช้หลอดควอทซ์ซึ่งมีป้ายกำกับว่ามีแรงดันไฟฟ้าพิกัด AC220V และอินพุตกระแสไฟพิกัดอยู่ที่ 10A โดยไม่มีกำลังไฟเข้าพิกัด เมื่อทำการทดสอบความร้อนตามข้อ 11 มาตรฐานกำหนดให้ผลิตภัณฑ์ทำงานที่ 1.15 เท่าของกำลังไฟฟ้าเข้าที่กำหนด ในสถานการณ์นี้ สามารถกำหนดกำลังไฟฟ้าเข้าพิกัดได้โดยใช้ข้อมูลในหมายเหตุของบทความนี้ อุปกรณ์ทำความร้อนมักจะทำเครื่องหมายกำลังไฟฟ้าเข้าพิกัด In most cases, the appliance is given a rated powerinput. Sometimes, the product is only given a rated input current, but during actual testing, standards require that…